Openbox and Skybox CCcam Setup

ATTACH BOX TO POWER CABLE, SATELLITE CABLE, HDMI CABLE AND NETWORK CABLE


CLINE SETUP

1: Go into the main menu
2: Select Network, enable your network and set the IP address to DHCP. Go back to network.
3: Select "CCcam Client Setup" If you can not see CCcam setup in the menu jump to number 9
4: If you have a cccam.cfg on your usb, we provide the CCcam.cfg file, ask for the full configured file from us to get all of our channels. Copy the CCcam.cfg file into the root folder from your USB stick. Do not copy the file in a specific folder.Select 'Update files by usb' if not, jump to number 10
5: On new window, highlight 'CCcam.cfg', press green button on remote (ADD). This will place a tick by it, the press yellow button on remote (READ)
6: Once finished, select 'Manage Config Files' and on new window select cccam.cfg again
7: A new page comes up with your cline on it, press green button on remote to make it active (tick should appear by it) Exit out of all menus to tv and select a pay channel.. it should clear, if not go back into menu, select Network, then 'Network Setup', and turn DHCP 'off' by using arrow keys and then hitting apply.
8: if channel still doesnt clear, reboot box and router by unplugging both from power and plugging back in (router first)

9: if you cant see this option go to network and press 6666 this should bring up hiden menu or 8888


10: for those who didnt create a cccam.cfg on their usb, you can add it manually..


a] instead of update by usb on ccccam client setup, go directly to Manage Config Files and select CCcam.cfg from new window
b] Press Blue button on remote
c] your cline will look something like this>>> C: example.3dcccamserver.com 12000 user pass
d] ON add cline window, leave Protocol as CCcam
e] Host: here you would enter example.3dcccamserver.com portion of your cline using remote number buttons like you was sending a text
f] Port: here you put 12000
g] User, write 'user' here
f: Password, write 'pass' here
g] Press ok and go up to instruction number 7 OF CLINE SETUP

Was this answer helpful?

 Print this Article

Also Read

Blade Media BM5000s

Load in the config file by USB just like before.Menu - Setup - Update & Backup - Image...

Sky de fix

Download BlackHole original...

vu+ solo4k

Download link-oscam, are in etc/tuxbox/config/oscamConfig(replace user pass with your own on...

How to Make CCcam.cfg file

Most of the satellite receiver boxes need CCcam.cfg file with your CCcam lines in it in order to...

Oscam Setup

Before setup oscam Stop and remove your cccam EMU else system will ban your IP and reject your...